piCorePlayer 1.19i
pCP Team
15 April 2015
pCP 1.19i
New versions piCorePlayer 1.19i and piCorePlayer 1.19i_RPi2 are available from the download page.
Changes
- Fixed the problem with Wifi and RPiA+ cards (did not load firmware).
- To set up an only Wifi based system download the newconfig.cfg file from here: Downloads. Then change the Wifi section so it fits your setup and save it to your SD card boot partition (in a windows computer just save it to the SD card as it is the only partition visible in windows). Next boot the Raspberry Pi from this SD card.
- Improved booting speed.
- Added Jivelite support on the Tweaks page - thanks to Ralphy for providing the Jivelite package.
- On armv6 boards (the older RPi’s) HDMI streaming now supports high sample rates.
- On armv7 boards (the new RPi2) HDMI streaming still only support up to 48kHZ. Sorry for that but my RPi2 compiling computer crashed. Will be fixed later.
For Wifi setup on a RPi A+ this section of newconfig.cfg needs changing:
########################## Edit the variables below to setup a Wifi based system without LAN access
# Change Wifi to "on". Valid options for Encryption are "WEP", "WPA" or "OPEN"
WIFI="off"
SSID="wireless"
PASSWORD="password"
ENCRYPTION="WPA"
# End Wifi setup
##########################
The pCP Team
Paul, Greg, Ralphy and Steen
Warning
Older versions of piCorePlayer may not be compatible with the newer versions of the Raspberry Pi. You need to review the Release notes to determine when the support for your particular Raspberry Pi was added. It is safer to use the latest version of piCorePlayer as it will be compatible with the latest version of the Raspberry Pi.
The Software and Information is provided "as is" without warranty of any kind, either express or implied, including without limitation any implied warranties of condition, uninterrupted use, merchantability, fitness for a particular purpose, or non-infringement.
Raspberry Pi is a trademark of the Raspberry Pi Foundation.